Aerosmith Epoxy and Chemical Anchors
Here is an approximation chart of various common chemical anchors available. You must consult with an engineer before making any switch.
| Aerosmith | DeWalt | ITW | Simpson | Hilti |
| ACR | AC100 | A7+ | AT Acrylic | HY Series |
| PE | Pure110 | C6+ | SET-3G | RE Series |
| PE | Pure110 | G5+ | SET-XP | RE Series |
Sure-Set® Pure Epoxy is a two-component 1:1 ratio pure epoxy bonded anchoring system for use in cracked and uncracked concrete under normal, as well as, seismic conditions (seismic category C1). Designed for the most demanding structural applications and rebar connections, Sure-Set® Pure Epoxy, offers high load capacities when used in conjunction with threaded rod, rebar or steel dowels. The Aerosmith® Adhesive System includes a two part adhesive packaged within plastic cartridges, a mixing nozzle is also packaged in with each tube to ensure proper mixing occurs. Dispensing tools and hole cleaning equipment is also available to ensure proper installation. Sure-Set® Pure Epoxy is a 100% epoxy resin that has been formulated with no MXDA, Phenol, N-Methyl Pyrrolidone, Bisphenol A, Phthalates or VOCs. This formulation exhibits minimal shrinkage which makes it ideal for use with oversized holes. In addition, the extended gel time also allows convenient use in deep holes and when used in high ambient temperatures.
The Sure-Set® Epoxy Acrylate (Acrylic) is the most environmentally friendly resin system within our range, at the same time it exhibits outstanding performance in concrete, masonry, and other base materials. It is ideally suited for high load/heavy duty structural anchoring applications. It can be used with threaded rod, reinforcing bar, and steel dowels in solid base materials or in conjunction with an Aerosmith® screen tube for hollow based anchoring applications. It is free of styrene’s, the Sure-Set® Epoxy Acrylate (Acrylic) formulation has a very low odor and is well suited for use indoors and in confined spaces. It also has a very low VOC content and no hazard symbols are required to be displayed on the product label, nor it is hazardous for any mode of transportation. Sure-Set® Epoxy Acrylate (Acrylic) has not only been evaluated by IAPMO, it has also been fire tested and has received fire resistance classification F120 (for use with threaded bars) & F240 (for use with rebars). For those operating in markets where American building codes are recognized, Epoxy Acrylate (Acrylic) can offer Evaluation Service Report from IAPMO ER-668.
To prevent system failure, all excess dust must be blown from the hole prior to filling with epoxy using compressed air.
Talk to Hardware Everywhere’s knowledgeable customer service team for help choosing the fasteners that match your application. Call us at 1-800-432-8979 or contact us online.